Monday, July 01, 2013

DB2 Locking, Part 13: Optimistic Locking

Continuing our series on DB2 locking, let's look into a relatively recent development -- optimistic locking...

IBM added improvements for optimistic locking techniques in DB2 9 for z/OS.  What is optimistic locking? Sometimes referred to as optimistic concurrency control, optimistic locking is basically just what it sounds like. We are optimists and think that usually we will be the only ones with interest in the data. In other words, when optimistic locking is implemented you are assuming that most of the time there will be no other programs that are interested in the page of data that you are planning to modify.

Of course, even in the most optimistic world there will be exceptions, so optimistic locking does not assume that there will never be any concurrent processes that need to access your page(s). Basically, with optimistic locking you can improve performance by minimizing locking. So how do we do that?

When an application uses optimistic locking, locks are obtained immediately before a read operation and then released immediately. Update locks are obtained immediately before an update operation and held until the end of the transaction. Optimistic locking uses the RID (Record IDentifier) and a row change timestamp to test whether data has been changed by another transaction since the last read operation.

DB2 knows when a row was changed and so therefore he (I always tend to make DB2 masculine, sorry ladies) can ensure data integrity even as he minimizes the duration of locks. With optimistic locking, DB2 releases the page (or row) locks immediately after a read operation. And if you are using row locks, DB2 releases the row lock after each FETCH, taking a new lock on a row only for a positioned update or a positioned delete.

Careful readers will have noticed that I talked about a “row change timestamp” but you may not have heard that expression before. DB2 V9 added support for automatically generated timestamp columns and if you wish to implement optimistic locking you will need to create (or alter) your tables to have a row change timestamp column, defined as follows:

NOT NULL GENERATED ALWAYS
FOR EACH ROW ON UPDATE
AS ROW CHANGE TIMESTAMP

or

NOT NULL GENERATED BY DEFAULT
FOR EACH ROW ON UPDATE
AS ROW CHANGE TIMESTAMP

For tables having a row change timestamp column, DB2 automatically populates and maintains the timestamp values for each row. Notice how the syntax is similar to the syntax used for other automatically generated DB2 values, such as sequences. DB2 will automatically generate the timestamp value for each row when the row is inserted, and modify the timestamp for each row when any column in that row is updated.

When you add a ROW CHANGE TIMESTAMP column to an existing table, the initial value for existing rows will not be immediately populated. Instead, DB2 places the table space in an advisory-REORG pending state. When you reorganize the table space, DB2 will generates the values for the ROW CHANGE TIMESTAMP column for all rows (and, of course, remove the advisory-REORG pending status).

OK, but how does this implement optimistic locking? Well, you can use this new column as a condition for making an UPDATE, by specifying it in your WHERE clause. Let’s walk thru a couple of examples.

First of all, when a table contains a ROW CHANGE TIMESTAMP you can use it to find out when its rows were modified. Let’s use the following table as an example:

CREATE TABLE CUSTOMER
 (CUSTNO           CHAR(8)   NOT NULL,
  CUST_INFOCHANGE  NOT NULL GENERATED ALWAYS
                   FOR EACH ROW ON UPDATE
                   AS ROW CHANGE TIMESTAMP,
  CUST_NAME        VARCHAR(50),
  CUST_ADDRESS     VARCHAR(100),
  CUST_CITY        CHAR(20),
  CUST_STATE       CHAR(2),
  CUST_ZIP         CHAR(9),
  CUST_PHONE       CHAR(10),

  PRIMARY KEY (CUSTNO))

Now that the table is defined with the ROW CHANGE TIMESTAMP we can use it in our programs and queries to determine change information about the data. For example, if we want to find all of the customer rows that were changed in the past week (ie. the last 7 days) we could run the following query:

SELECT CUSTNO, CUST_NAME
FROM   CUSTOMER
WHERE  ROW CHANGE TIMESTAMP FOR CUSTOMER <=
       CURRENT TIMESTAMP
AND    ROW CHANGE TIMESTAMP FOR CUSTOMER >=
       CURRENT TIMESTAMP - 7 DAYS;

But what would happen if you issued a statement like this against a table that was altered to include a ROW CHANGE TIMESTAMP? For example, if we created the CUSTOMER table as shown but without the CUST_INFOCHANGE column, populated the table with data, and then altered the table to include the CUST_INFOCHANGE column? In this case, DB2 will use the time the page was last modified. So the results will not be exactly correct because it would return all the rows on each page that qualifies (because at least one row on the page changed). This is why it is important to clear up the advisory REORG pending as soon as possible after adding the ROW CHANGE TIMESTAMP.

This is all well and good, and you can probably see the value of having this automagically changing timestamp in some of your tables, but where is the optimistic locking part? Well, for programs that use updateable static scrollable cursors DB2 can use optimistic locking as long as the program is bound specifying ISOLATION(CS). If you have this situation, DB2 will deploy optimistic locking to reduce the duration of locks between consecutive FETCH operations and between fetch operations and subsequent positioned UPDATE or DELETE operations.

Without optimistic locking, the lock taken at the first FETCH is held until the next FETCH. The lock taken at the last FETCH is held until COMMIT, ROLLBACK, or the end of transaction.

With optimistic locking, the scenario changes significantly. When the application requests a FETCH to position the cursor on a row, DB2 locks that row, executes the FETCH and releases the lock. When the application requests a positioned UPDATE or DELETE on the row, DB2 locks the row and then re-evaluates the predicate to ensure that the row still qualifies for the result table.

Optimistic locking itself will not happen without some effort on your part. Your application must have a ROW CHANGE TIMESTAMP and it must be selected first. Then, during a modification, a predicate needs to be added as a condition to tell whether the row has been modified or not. The static scrollable cursor uses the optimistic locking technique automatically. DB2 cannot use optimistic concurrency control for dynamic scrollable cursors. With dynamic scrollable cursors, the most recently fetched row or page from the base table remains locked to maintain position for a positioned UPDATE or DELETE.


So, if you have not taken a look at which applications might benefit from optimistic locking techniques since your shop migrated to you move to DB2 9 for z/OS it is time to take a look at what applications could take advantage of optimistic locking – and then add the ROW CHANGE TIMESTAMP to the appropriate tables.

Wednesday, June 19, 2013

DB2 Locking, Part 12: Lock Promotion and Escalation

It can be potentially troublesome when DB2 lock promotion and escalation occur. These situations can greatly reduce the availability of concurrent access to data.

First let's look at lock promotion. When binding a program with an ISOLATION level of RR, the optimizer sometimes decides that table space locks will perform better than page locks. As such, the optimizer promotes the locking level to table space locking, regardless of the LOCKSIZE specified in the DDL. This process is called lock promotion.

When you set the LOCKSIZE bind parameter to ANY, DB2 processing begins with page-level locking. As processing continues and locks are acquired, however, DB2 might decide that too many page (or row) locks have been acquired, causing inefficient processing.

In this scenario, DB2 escalates the level of locking from page (or row) locks to table or table space locks—a procedure called lock escalation. The threshold governing when lock escalation occurs is set in one of two ways:

  • The DSNZPARM start-up parameters for DB2 
  • The LOCKMAX parameter of the CREATE or ALTER TABLESPACE statement (which is stored in the MAXROWS column of SYSIBM.SYSTABLESPACE)

Lock escalation applies to objects defined with LOCKSIZE ANY in the DDL.

There are some limitations on lock escalation, though. A table lock can never be escalated to a table space lock. Table space locks are the highest level of locking and, therefore, cannot be escalated. Furthermore, a row lock will not be escalated to a page lock. It will be escalated to a table space lock.

User lock escalation occurs if a single user accumulates more page locks than are allowed by the DB2 subsystem (as set in DSNZPARMs), the program is informed via a -904 SQLCODE. The program can either issue a ROLLBACK and produce a message indicating that the program should be modified to COMMIT more frequently or, alternately, escalate the locking strategy itself by explicitly issuing a LOCK TABLE statement within the code.

Prior to implementing the second approach, be sure to understand the ramifications of issuing the  LOCK TABLE statement and how it works.

Locking DSNZPARMs

There are two  DSNZPARM parameters that are used to govern DB2 locking and lock escalation: NUMLKTS and NUMLKUS.

NUMLKTS defines the threshold for the number of page locks that can be concurrently held for any one table space by any single DB2 application (thread). When the threshold is reached, DB2 escalates all page locks for objects defined as LOCKSIZE ANY according to the following rules:

  • All page locks held for data in segmented table spaces are escalated to table locks.
  • All page locks held for data in partitioned table spaces are escalated to table space locks.

NUMLKUS defines the threshold for the total number of page locks across all table spaces that can be concurrently held by a single DB2 application. When any given application attempts to acquire a lock that would cause the application to surpass the NUMLKUS threshold, the application receives a resource unavailable message (SQLCODE of -904).

TABLESPACE DDL Locking Parameters

In general, letting DB2 handle the level of locking required can be a fine strategy. Turning over the determination for lock size to DB2 requires setting LOCKSIZE ANY. Of course, you might have a compelling reason to use a specific LOCKSIZE. For example, you might choose to specify LOCKSIZE PAGE to explicitly direct DB2 to lock at the page level. Or, under certain conditions you might choose LOCKSIZE ROW to implement row-level locking.

The LOCKMAX parameter specifies the maximum number of page or row locks that any one process can hold at any one time for the table space. When the threshold is reached, the page or row locks are escalated to a table or table space lock. The LOCKMAX parameter is similar to the NUMLKTS parameter, but for a single table space only.

Monday, June 17, 2013

DB2 Locking, Part 11: Data Sharing Global Lock Management

Data sharing adds an additional level of complexity to the DB2 locking strategies and techniques we have been discussing in this series. Because data sharing group members can access any object from any member in the group, a global locking mechanism is required. It is handled by the lock structure defined in the coupling facility. The lock structure is charged with managing inter-member locking. Without a global lock management process, data integrity problems could occur when one member attempts to read (or change) data that is in the process of being changed by another member.

Data sharing groups utilize a global locking mechanism to preserve the integrity of the shared data. The global locking mechanism allows locks to be recognized between members.

Global Locking

All members of a data sharing group must be aware of locks that are held or requested by the other members. The DB2 data sharing group utilizes the coupling facility (CF) to establish and administer global locks.

The IRLM performs locking within each member DB2 subsystem. Additionally, the IRLM communicates with the coupling facility to establish global locks. Each member of the data sharing group communicates lock requests to the coupling facility’s lock structure. The manner in which a transaction takes locks during execution does not change. The only difference is that, instead of being local locks, the locks being taken are global in nature.

DB2 data sharing does not use message passing to perform global locking. The members DB2 IRLMs use the coupling facility to do global locking. Contention can be identified quickly without having to suspend the tasks to send messages around to the other DB2 members contained in the data sharing group. The following list outlines the events that occur when transactions from different DB2 members try to access the same piece of data:


  1. TXN1 requests a lock that is handled by the local IRLM.
  2. The local IRLM passes the request to the coupling facility global lock structures to ensure that no other members have incompatible locks. No incompatible locks are found, so the lock is taken.
  3. TXN2 requests a lock that is handled by its local IRLM. The lock is for the same data held by TXN1 executing in a different DB2 subsystem.
  4. Once again, the local IRLM passes the request to the coupling facility global lock structures to check for lock compatibility. In this case, an incompatible lock is found, so the lock request cannot be granted. The task is suspended.
  5. Eventually, TXN1 executes a COMMIT, which releases all local and global locks.
  6. TXN2 now can successfully execute the lock and continue processing.


Data Sharing Locking Considerations 

Consider specifying TRACKMOD NO for objects used in a data sharing environment to avoid locking problems. In addition, consider the MEMBER CLUSTER option. The MEMBER CLUSTER option indicates that DB2 should locate table space data based on available space rather than clustering the data by the clustering index. This option can benefit applications when there are many inserts to the same table from multiple members.

You might also improve performance by randomizing index key columns to reduce hot spots. This can be accomplished using the RANDOM keyword of CREATE INDEX.

The coupling facility level (CFLEVEL) can also be a consideration. DB2 prefetch processing for GBP-dependent page sets and partitions varies depending on the CFLEVEL in which the group buffer pool is allocated.

If the group buffer pool is allocated in a coupling facility with CFLEVEL=0 or 1, DB2 reads and registers one page at a time in the group buffer pool. If the group buffer pool is allocated in a coupling facility with CFLEVEL=2 or higher, DB2 can register the entire list of pages prefetched with one request to the coupling facility.

You can determine the CFLEVEL of your coupling facility using the DISPLAY GROUP command.

Lock Structures

The coupling facility contains several lock structures that are used for global locking purposes. The lock lists contain names of modified resources. This information is used to notify members of the data sharing group that the various resources have been changed.

Additionally, a hash table is used to identify compatible and incompatible lock modes. If the same hash value is used for the same resource name from different systems (with incompatible lock modes), lock contention will occur. If the same hash value is used for different resource names (called a hashing collision), false contention will occur. Any contention requires additional asynchronous processing to occur.

Hierarchical Locking

DB2 data sharing introduces the concept of explicit hierarchical locking to reduce global locking overhead (which increases global locking performance). Explicit hierarchical locking allows data sharing to differentiate between global and local locks. When no inter-DB2 interest occurs in a resource, the local IRLM can grant locks locally on the resources that are lower in the hierarchy. This feature allows the local DB2 to obtain local locks on pages or rows for that table space without notifying the coupling facility. In a data sharing environment, locks on the top parents are always propagated to the coupling facility lock structures. (These structures are detailed on the previous page.) In addition, the local DB2 propagates locks on children, depending on the compatibility of the maximum lock held on a table space that also has other members of the DB2 data sharing group requesting locks on it.

P-Locks Versus L-Locks

DB2 data sharing introduces two new lock identifiers: P-locks and L-locks.

P-locks preserve inter-DB2 coherency of buffered pages. P-locks are owned by the member DB2 subsystem and are used for physical resources such as page sets. These physical resources can be either data objects or index objects. P-locks are held for the length of time the pages are locally cached in the local buffer pool. As such, data can be cached beyond a transaction commit point.

P-locks are negotiable. If multiple DB2 members hold incompatible P-locks, the IRLMs try to downgrade lock compatibility. P-locks are never timed out. Because P-locks are not owned by transactions, they cannot be deadlocked. The sole job of a P-lock is to ensure inter-DB2 coherency. P-locks notify the data sharing group that a member of that group is performing work on that resource. This way, the coupling facility can become involved and begin treating the resources globally.

L-locks are used for both intra- and inter-DB2 concurrency between transactions. L-locks can either be local or global in scope. L-locks are owned by transactions and are held for COMMIT or allocation duration. L-locks are not negotiable and, as such, must wait for incompatible L-locks held by other DB2 members to be released before they can be taken. Suspended L-locks can be timed out by the IRLM.

Monday, June 10, 2013

DB2 Locking, Part 10: Know Your ISOLATION Levels

DB2 provides a way to change the way that a program or SQL statement acquires locks. That way is known as the isolation level and it can be set to specify the locking behavior for a transaction or statement. Standard SQL defines four isolation levels that can be set using the SET TRANSACTION ISOLATION LEVEL statement:
  • Serializable
  • Repeatable read
  • Read committed
  • Read uncommitted

The isolation level determines the mode of page or row locking implemented by the program as it runs.
DB2 supports a variation of the standard isolation levels. DB2 implements page and row locking at the program execution level, which means that all page or row locks are acquired as needed during the program run. Page and row locks are released as the program run depending on the isolation level.

In DB2 you can specify the following four isolation levels: cursor stability (CS), repeatable read (RR), read stability (RS), and uncommitted read (UR).

Using the ISOLATION parameter of the BIND command you can set the isolation level of a package or plan. You also can use the WITH parameter on a SELECT statement to set the isolation level of a single SQL statement.

Cursor stability is the DB2 implementation of the SQL standard read committed isolation level. CS is perhaps the most common DB2 isolation level in use in production applications because it offers a good tradeoff between data integrity and concurrency. When CS is specified the transaction will never read data that is not yet committed; only committed data can be read. Cursor stability is the default isolation level if none is specified at BIND time.

A higher level of integrity is provided with repeatable read. Under an RR isolation level all page locks are held until they are released by a COMMIT (or ROLLBACK), whereas with CS read-only page locks are released as soon as another page is accessed.
Repeatable read is the default isolation level if none is specified at BIND time.

An RR page locking strategy is useful when an application program requires consistency in rows that may be accessed twice in one execution of the program, or when an application program requires data integrity that cannot be achieved with CS.

For example of a good reason to use RR page locking, consider a reporting program that scans a table to produce a detail report, and then scans it again to produce a summarized managerial report. If the program is bound using CS, the results of the first report might not match the results of the second.

Suppose that you are reporting the estimated completion dates for project activities. The first report lists every project and the estimated completion date. The second, managerial report lists only the projects with a completion date greater than one year.

The first report indicates that two activities are scheduled for more than one year. After the first report but before the second, however, an update occurs. A manager realizes that she underestimated the resources required for a project. She invokes a transaction to change the estimated completion date of one of her project's activities from 8 months to 14 months. The second report is produced by the same program, but reports 3 activities.

If the program used an RR isolation level rather than CS, an UPDATE that occurs after the production of the first report but before the second would not have been allowed. The program would have maintained the locks it held from the generation of the first report and the updater would be locked out until the locks were released.

How about another example? Consider a program that is looking for pertinent information about employees in the information center and software support departments who make more than $30,000 in base salary. In the DB2 sample tables department 'C01' is the information center and department 'E21' is software support.
The program opens a cursor based on the following SELECT statement:

    SELECT  EMPNO, FIRSTNME, LASTNAME,
            WORKDEPT, SALARY
    FROM    DSN8710.EMP
    WHERE   WORKDEPT IN ('C01', 'E21')
    AND     SALARY > 30000;

The program then begins to FETCH employee rows. Assume further, as would probably be the case, that the statement uses the XEMP2 index on the WORKDEPT column. An update program that implements employee modifications is running concurrently. The program handles transfers by moving employees from one department to another, and implements raises by increasing the salary.

Assume that Sally Kwan, one of your employees, has just been transferred from the information center to software support. Assume further that another information center employee, Heather Nicholls, received a 10 percent raise. The update program running concurrently with the report program implements both of these modifications.

If the report program were bound with an isolation level of CS, the second program could move Sally from 'C01' to 'E21' after she was reported to be in department 'C01' but before the entire report was finished. Thus, she could be reported twice: once as an information center employee and again as a software support employee. Although this circumstance is rare, it can happen with programs that use cursor stability. If the program were bound instead with RR, this problem could not happen. The update program probably would not be allowed to run concurrently with a reporting program, however, because it would experience too many locking problems.
Now consider Heather's dilemma. The raise increases her salary 10 percent, from $28,420 to $31,262. Her salary now fits the parameters specified in the WHERE condition of the SQL statement. Will she be reported? It depends on whether the update occurs before or after the row has been retrieved by the index scan, which is clearly a tenuous situation. Once again, RR avoids this problem.

You might be wondering, "If CS has the potential to cause so many problems, why is it used so ubiquitously? Why not trade the performance and concurrency gain of CS for the integrity of RR?"

The answer is simple: the types of problems outlined are rare. The expense of using RR, however, can be substantial in terms of concurrency. So the tradeoff between the concurrency expense of RR and the efficiency of CS usually is not a sound one.

The third isolation level provided by DB2 is read stability (RS), which is like the SQL standard serializable level. Read stability is similar in functionality to the RR isolation level. A retrieved row or page is locked until the end of the unit of work; no other program can modify the data until the unit of work is complete, but other processes can insert values that might be read by your application if it accesses the row a second time.

Use read stability only when your program can handle retrieving a different set of rows each time a cursor or singleton SELECT is issued. If using read stability, be sure your application is not dependent on having the same number of rows returned each time.

Finally, we come to the last, and most maligned isolation level, uncommitted read (UR). The UR isolation level provides read-through locks, also know as dirty read or read uncommitted. Using UR can help to overcome concurrency problems. When you're using an uncommitted read, an application program can read data that has been changed but is not yet committed.

UR can be a performance booster, too, because application programs bound using the UR isolation level will read data without taking locks. This way, the application program can read data contained in the table as it is being manipulated. Consider the following sequence of events:

(1) To change a specific value, at 9:00 a.m. a transaction containing the following SQL is executed:

    UPDATE    EMP
       SET FIRSTNME = "MICHELLE"
    WHERE     EMPNO = 10020;

     The transaction is a long-running one and continues to execute without issuing a COMMIT.

(2) At 9:01 a.m., a second transaction attempts to SELECT the data that was changed, but not committed.

If the UR isolation level were used for the second transaction, it would read the changed data even though it had yet to be committed. Obviously, if the program doesn't need to wait to take a lock and merely reads the data in whatever state it happens to be at that moment, the program will execute faster than if it had to wait for locks to be taken and resources to be freed before processing.

The implications of reading uncommitted data, however, must be carefully examined before being implemented. Several types of problems can occur. Using the previous example, if the long-running transaction rolled back the UPDATE to EMPNO 10020, the program using dirty reads may have picked up the wrong name ("MICHELLE") because it was never committed to the database.

Inaccurate data values are not the only problems that can be caused by using UR. A dirty read can cause duplicate rows to be returned where none exist. Alternatively, a dirty read can cause no rows to be returned when one (or more) actually exists. Additionally, an ORDER BY clause does not guarantee that rows will be returned in order if the UR isolation level is used. Obviously, these problems must be taken into consideration before using the UR isolation level.

Keep in mind, too, that the UR isolation level applies to read-only operations: SELECT, SELECT INTO, and FETCH from a read-only result table. Any application plan or package bound with an isolation level of UR will use uncommitted read functionality for any read-only SQL. Operations contained in the same plan or package and are not read-only will use an isolation level of CS.

When is it appropriate to use UR isolation? The general rule of thumb is to avoid UR whenever the results must be 100 percent accurate. Following are examples of when this would be true:
  • Calculations that must balance are being performed on the selected data
  • Data is being retrieved from one source to insert to or update another
  • Production, mission-critical work is being performed that cannot contain or cause data integrity problems

In general, most DB2 applications are not serious candidates for dirty reads. In a few specific situations, however, the dirty read capability will be of major benefit. Consider the following cases in which the UR isolation level could prove to be useful:
  • Access is required to a reference, code, or look-up table that basically is static in nature. Due to the non-volatile nature of the data, a dirty read would be no different than a normal read the majority of the time. In those cases when the code data is being modified, any application reading the data would incur minimum, if any, problems.
  • Statistical processing must be performed on a large amount of data. Your company, for example, might want to determine the average age of female employees within a certain pay range. The impact of an uncommitted read on an average of multiple rows will be minimal because a single value changed will not greatly impact the result.
  • Dirty reads can prove invaluable in a data warehousing environment that uses DB2 as the DBMS. A data warehouse is a time-sensitive, subject-oriented, store of business data that is used for online analytical processing. Other than periodic data propagation and/or replication, access to the data warehouse is read-only. Because the data is generally not changing, an uncommitted read is perfect in a read-only environment due to the fact that it can cause little damage. More data warehouse projects are being implemented in corporations worldwide and DB2 with dirty read capability is a very wise choice for data warehouse implementation.
  • In those rare cases when a table, or set of tables, is used by a single user only, UR can make a lot of sense. If only one individual can be modifying the data, the application programs can be coded such that all (or most) reads are done using UR isolation level, and the data will still be accurate.
  • Finally, if the data being accessed already is inconsistent, little harm can be done using a dirty read to access the information.

Although the dirty read capability can provide relief to concurrency problems and deliver faster performance in specific situations, it also can cause data integrity problems and inaccurate results. Be sure to understand the implications of the UR isolation level and the problems it can cause before diving headlong into implementing it in your production applications.

Summary


It is important for DB2 DBAs and application programmers to know the four isolation levels and their impact on SQL. Using the isolation levels is an effective way to control concurrency and locking for your DB2 applications.

Monday, June 03, 2013

DB2 Locking, Part 9: Avoid Bachelor Programming Syndrome

Unless you plan for, and issue regular COMMITs in your DB2 application programs, you will be causing locking problems. It is important for every programmer to issue COMMIT statements in all application programs where data is modified (INSERT, UPDATE, and DELETE). A COMMIT externalizes the modifications that occurred in the program since the beginning of the program or the last COMMIT. A COMMIT ensures that all modifications have been physically applied to the database, thereby ensuring data integrity and recoverability.

Failing to code COMMITs in a data modification program is what I like to call Bachelor Programming Syndrome — or in other words, fear of committing.

One important factor affecting the need for a COMMIT strategy is the amount of elapsed time required for the program to complete. The greater the amount of time needed, the more important it becomes to issue periodic COMMITs. A sound COMMIT strategy will reduce rollback time and reprocessing time in the event of program failure. It is a safe assumption that the elapsed time increases as the number of modifications increases.

Issuing COMMITs in an application program is important for three reasons:
  1. If the program fails, all the modifications are backed out to the last COMMIT point. This process could take twice the time it took to perform the modifications in the first place—especially if you are near the end of a program with no COMMITs that performed hundreds or thousands of modification operations.
  2. If you resubmit a failing program that issues no COMMITs, the program redoes work unnecessarily.
  3. Programs using the repeatable read page locking strategy or the RELEASE(COMMIT) table space locking strategy hold their respective page and table space locks until a COMMIT is issued. If no COMMITs are issued during the program, locks are not released until the auto-COMMIT when the program completes, thereby negatively affecting concurrent access. This can cause lock timeouts and lock escalation.
If concurrent batch or online access uses uncommitted read (UR) isolation, sometimes referred to as dirty reads, COMMIT processing is irrelevant. This is so because uncommitted read isolation does not take any locks. However, most processing requires accurate data and, as such, will not use uncommitted read isolation.

If your program is running for a long time and has issued no COMMITs, your program will probably not suffer. However, others attempting to access the data that is locked by your program will suffer. This will manifest itself with lock timeout errors (such as -911 and -913 SQL return codes). If you see a lot of lock timeouts occurring it is probably a good bet that you have at least one long-running program (maybe more) that needs to have COMMIT logic added.

It is also good programming practice to issue periodic COMMITs in long-running read-only programs. Even though data is not being changed, some databae management systems, such as DB2 for z/OS, acquire read locks whenever data is accessed. A read lock can block other programs (such as utility operations) from running successfully. Therefore, failure to COMMIT, even in a read only program, can result in locking problems.

In some rare circumstances, you might be able to avoid issuing COMMITs in your database programs. But you should only consider doing so for programs that run very quickly, and therefore will not hold locks for a long duration.

Given the tremendous benefits to your DBMS environment that can be gained by assuring a proper COMMIT strategy, why would you ever consider avoiding COMMITs? Perhaps the simplest argument is that the code is easier to write without COMMITs. Additionally, recovery is simpler. When modification programs without COMMITs fail, you can generally restart them from the beginning because database changes have not been committed. Of course, this might not be true if you have modified data not controlled by the DBMS (in which case dual modifications may cause problems).

If you choose to forgo COMMITs in any application program it is wise to clearly document why there are no COMMITs being issued. That way, if the program is changed later rendering the original assumptions inaccurate, adding COMMITs can be considered using the original reasoning accompanied by the added processing changes.

I recommend that you plan to issue COMMITs in every batch program... even read only programs. The COMMIT will release claim requests, which can free up DB2 utilities to execute, thereby improving overall availability.

You can structure the logic so that the COMMIT processing is contingent on a parameter passed to the program. This approach enables an analyst to turn off COMMIT processing but ensures that all batch programs are prepared if COMMIT processing is required in the future.